Description

Multi-station Smoke Collector

Industrial Fume Extractor 1 Head 135W

• High air volume
• Large suction
• High filtration efficiency
• Easy to use

Optimized air duct design, purification and quieter.

Ultra-quiet operation ensures a more comfortable workshop environment.

Specifications :

Head: 1 Head
Air inlet interface: Ø75 mm
Input voltage: AC220V 50HZ
Rated power: 135 W
Wind speed: 1×20 m/s
Filter effect: 0.3um 99.70%
Noise: ≤ 60dB
Smoking pipe (standard): 2xØ75mm*L1.4M
Airflow: 250 m3/h
Dimensions: W425 X D235 X H480 (mm)
Body weight: 15-17 Kg

Components:

Filter Media Lifespan:

Lifespan

Note: Due to varying levels of pollution in different locations, filter replacement frequency depends on actual conditions.

Triple Filtration Cycle Purification

Eliminates airborne contaminants detrimental to health.

Primary Filter Cotton

• Intercepts particles larger than 50µm in smoke.
• Replacement cycle: Recommended every 2-4 weeks.

Medium Efficiency Filter

• Filters stratified particles in smoke and dust.
• Purification rate for particles above 0.3µm reaches 99%.
• Replacement cycle: Recommended every 3-6 months.

Activated Carbon High Efficiency Filter

• Adsorbs toxic and harmful gases.
• Highest purification rate can reach 99.97%.
• Replacement cycle: Recommended every 6-12 months.

Dimensions:

Rear View

Side View

Rear View

Dimensions: Multi-station Smoke Collector 1 Head

Dimensions: Multi-station Smoke Collector 2 Heads

Can be powered by standard household electricity.

The fume/dust extraction hose is flexible and can be positioned as needed.

Wide nozzle opening for increased smoke capture area.

Machine cover.

Applications:

Soldering
Immersion tin
Laser Medical
Moxibustion beauty
Chemistry experiment
Polishing

Assembly Instructions:

Connect the power cord to the machine and press the power switch (located next to the power cord input). Then, turn on the machine.

Adjust the hose of the machine to a straight line to facilitate efficient and rapid movement of dust and smoke to the collection unit.

Connect to the main equipment.

Bend the upper part of the hose as desired and attach the nozzle.

Adjust the suction power of the machine.

Test smoke extraction during lead soldering.

Industrial Smoke Collector for Soldering and Laser Marking – Multi-station Smoke Collector

Component Assembly of Industrial Smoke Collector – Multi-station Smoke Collector

Operation of Industrial Smoke Collector for Laser Marking and Lead Soldering Fume Extraction