View All ProductsDescription
About connection method:
- The actuator motor plug is supplied with our controller. If a supporting controller is not used, carefully cut the connector. The two wires present are for positive and negative connections. Reversing the polarity controls the extension and retraction. A simple positive/negative switch can be integrated to control telescoping.
- Minimum installation dimensions (fully retracted push rod, distance between mounting holes): L = S + 175mm.
- Maximum installation dimensions (fully extended push rod, distance between mounting holes): 2 * S + 175mm.
- The actuator motor utilizes two wires (positive and negative) for controlling telescopic extension and retraction (lifting).
- Higher speed operation results in lower thrust; conversely, slower operation yields greater thrust.
