View All ProductsDescription
Linear Actuator Motor LX600 – 30mm Stroke
Connection Method Details:
- The linear actuator motor is equipped with a dedicated controller plug. If a controller is not used, the connector can be cut. The two wires (positive and negative) allow for directional control of extension and retraction. By reversing the polarity, and optionally adding a switch, bidirectional telescopic control can be achieved.
- Minimum installation dimension (push rod fully retracted): L = S + 175mm. (S represents the stroke length)
- Maximum installation dimension (push rod fully extended): 2 * S + 175mm. (S represents the stroke length)
- The motor utilizes two wires (positive and negative) for bidirectional telescopic (lifting) control.
- Higher speeds are achieved at the expense of reduced thrust. Conversely, lower speeds result in increased thrust.
