View All ProductsDescription
CNC Plasma Control System F2100B
Basic Parameters / Hardware Configuration:
MCU: ARM9
Number of axes of motion: Two axes motion interpolation (extendable to three axes)
Maximum code lines: 150,000 lines
Single cutting code size: 4MB
File memory space: Electronic bulk memory chip, 512MB
User file memory space: 256MB
Control accuracy: ±0.001mm
Coordinate range: ± 99999.99mm
Maximum pulse frequency: 250KHz; Maximum motion speed: 25m/sec.
Time resolving capability: 10ms
System power: DC +24V
System operating conditions: Temperature: 0℃ – +55℃; Relative Humidity: 0-95%.
Interface: USB
Frame: Overall metal structure, resistant to electromagnetic radiation, anti-interference, anti-static
Special configuration: Touchpad, 100m wireless remote controller, and wired control box (optional for the full F2000 series)
Supports oxygen gas, plasma, powder, and simulation demo modes.
Keyboard: PCB film keyboard, PS/2 interface, OMRON buttons
System Characteristics:
45 categories of different graphics (including grid patterns); chip parts and hole parts are selectable.
Graphics support operations such as Proportion, Rotate, and Mirror.
Graphics can be arranged in matrix, interaction, and stacked modes.
Cutting speed is automatically restricted by a corner speed limit based on plate thickness, effectively preventing over-burning.
Metric/Imperial system switch.
Steel plate alignment can be adjusted to any steel edge.
Coordinate system can be customized to support all eight types of two-dimensional coordinates.
All input and output port types and quantities can be customized (normally open or normally closed).
System and parameter backup, online system update.
Chinese/English (including Japanese, Russian, French, and other languages) file system and menu can be switched with a single key.
Manual row and column selection.
Supports edge cutting and offset cutting.
Automatically memorizes working status and the last cutting point upon power loss.
Dynamic/static process illustration, graphics zoom in/out, dynamically tracking cut-off point under zooming state.
Supports ArtCAM, TYPEIII, PM2000 CAM software.
Set different administrative authority levels and corresponding passwords to protect manager privileges.
